Laser Engraving Machine

The model of the Laser Engraving Machine located in Hackerspace.gr (Ampatiellou 11, 11144, Athens) is HQ-3020B. It is capable of cutting, engraving, and marking a number of different materials quickly and accurately when driven from CAD software such as CorelDraw and Inkscape.



How to use it:

Download:

> Inkscape [1]

> K40 Whisperer [2]



To create your file:

> Open Inkscape

File 1.jpeg











> Draw your design with lines

File (2).jpg
File (3).jpg
File (4).jpg





























> Make colors in RGB (RED to engrave, BLUE to cut)

File (6).jpg
File (7).jpg





















> Select correct Document Properties:

- UNITS must be all in MM

- RESIZE page to content

File (9).jpg
File (10).jpg
File (12).jpg































> Save as .svg file.

File (13).jpg
File (15).jpg
File (16).jpg



































To cut your file:



> Connect computer and machine with USB cable

File (16).jpg

> Switch on the machine:

- Switch power on

- Switch light on

- Connect on current ~



In K40 Whisperer:

( > Open K40 Whisperer )

> Initialize laser-cutter

File K40 (1).jpg

> Open design file

File K40 (2).jpg
File K40 (3).jpg

> Adjust starting point and speed in K40 Whisperer

File K40 (4).jpg
File K40 (5).jpg
File K40 (6).jpg

On the machine:

> Place your material inside (it must be no bigger than A4)

> Adjust power on machine



> First engrave (BLUE) and then (CUT)



> Switch off machine

> Clean up gently with vacuum cleaner



This text contains information copied or inspired from http://atxhackerspace.org .