Laser Engraving Machine

The model of the Laser Engraving Machine located in Hackerspace.gr (Ampatiellou 11, 11144, Athens) is HQ-3020B. It is capable of cutting, engraving, and marking a number of different materials quickly and accurately when driven from CAD software such as CorelDraw and Inkscape.



How to use it:

Download:

> Inkscape [1]

> K40 Whisperer [2]



To create your file:

> Open Inkscape

File 1.jpeg











> Draw your design with lines

File (2).jpg
File (3).jpg
File (4).jpg





























> Make colors in RGB (RED to engrave, BLUE to cut)

File (6).jpg
File (7).jpg





















> Select correct Document Properties:

- UNITS must be all in MM

- RESIZE page to content

File (9).jpg
File (10).jpg
File (12).jpg































> Save as .svg file.

File (13).jpg
File (15).jpg
File (16).jpg



































To cut your file:



> Connect computer and machine with USB cable

Usb-min.jpg













> Switch on the machine:

Switch (2)-min.jpg













- Switch power on

- Switch light on

Switches-min.jpg













- Plug-in air - compressor

Vacuuuum-min.jpg













In K40 Whisperer:

( > Open K40 Whisperer )

File K40 (2).jpg













> Initialize laser-cutter

File K40 (1).jpg













> Open design file

File K40 (2).jpg
File K40 (3).jpg

























> Adjust starting point and speed in K40 Whisperer

File K40 (4).jpg
File K40 (5).jpg
File K40 (6).jpg





































On the machine:

> Place your material inside (it must be no bigger than A4)

Placematerial-min.jpg
Open-min.jpg

























> Adjust power on machine

Poweradjustment-min.jpg













> Make test

Test-min.jpg
Test2-min.jpg

























> First engrave (BLUE) and then (CUT) by clicking "Vector Engrave" and "Vector Cut" in "K40 Whisperer".

File K40 (6).jpg
Cut-min.jpg
Cut (2)-min.jpg
Result-min.jpg















































Make sure temperature does not exceed 30 °C

Temperature-min.jpg













> Switch off machine

> Clean up gently with vacuum cleaner

Vacuum.jpg
Cleanup-min.jpg



























This text contains information copied or inspired from http://atxhackerspace.org .