Difference between revisions of "Laser Engraving Machine"
Chloe.lornua (Talk | contribs) |
Chloe.lornua (Talk | contribs) |
||
| Line 2: | Line 2: | ||
It is capable of cutting, engraving, and marking a number of different materials quickly and accurately when driven from CAD software such as CorelDraw and Inkscape. | It is capable of cutting, engraving, and marking a number of different materials quickly and accurately when driven from CAD software such as CorelDraw and Inkscape. | ||
| − | |||
| − | - | + | '''Contents:''' |
| + | |||
| + | - How to use it | ||
- Materials that can and cannot be laser-cut [https://www.pololu.com/docs/0J24/3] | - Materials that can and cannot be laser-cut [https://www.pololu.com/docs/0J24/3] | ||
| Line 503: | Line 504: | ||
| + | |||
| + | |||
| + | |||
| + | == Useful links == | ||
| + | |||
| + | > boxes.py [https://www.festi.info/boxes.py/] | ||
| + | |||
| + | > obrary [https://obrary.com/collections/open-designs] | ||
| + | |||
| + | |||
| + | == Projects == | ||
| + | |||
| + | > [[what is cosmos / τι είναι κόσμος]] | ||
This text contains information copied or inspired from http://atxhackerspace.org . | This text contains information copied or inspired from http://atxhackerspace.org . | ||
Revision as of 17:06, 14 February 2019
The model of the Laser Engraving Machine located in Hackerspace.gr (Ampatiellou 11, 11144, Athens) is HQ-3020B. It is capable of cutting, engraving, and marking a number of different materials quickly and accurately when driven from CAD software such as CorelDraw and Inkscape.
Contents:
- How to use it
- Materials that can and cannot be laser-cut [1]
- Useful links
- Projects
How to use it:
Download:
> Inkscape [2]
> K40 Whisperer [3]
To create your file:
> Open Inkscape
> Draw your design with lines
.jpg)
.jpg)
.jpg)
> Make colors in RGB (RED to engrave, BLUE to cut)
.jpg)
.jpg)
> Select correct Document Properties:
- UNITS must be all in MM
- RESIZE page to content
.jpg)
.jpg)
.jpg)
> Save as .svg file.
.jpg)
.jpg)
.jpg)
To cut your file:
> Connect computer and machine with USB cable
> Switch on the machine:
-min.jpg)
- Switch power on
- Switch light on
- Plug-in air - compressor
In K40 Whisperer:
( > Open K40 Whisperer )
.jpg)
> Initialize laser-cutter
.jpg)
> Open design file
.jpg)
> Adjust starting point and speed in K40 Whisperer
.jpg)
.jpg)
.jpg)
On the machine:
> Place your material inside (it must be no bigger than A4)
> Adjust power on machine
> Make test
> First engrave (BLUE) and then (CUT) by clicking "Vector Engrave" and "Vector Cut" in "K40 Whisperer".
-min.jpg)
Make sure temperature does not exceed 30 °C
> Switch off machine
> Clean up gently with vacuum cleaner
Useful links
Projects
> what is cosmos / τι είναι κόσμος
This text contains information copied or inspired from http://atxhackerspace.org .