Difference between revisions of "Laser Engraving Machine"

From Hackerspace.gr
Jump to: navigation, search
Line 18: Line 18:
 
'''[[To create your file:]]'''
 
'''[[To create your file:]]'''
  
> Open Incscape
+
> Open Inkscape
 +
 
 +
[[File:File 1.jpeg|left|thumb]]
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
  
 
> Draw your design with lines   
 
> Draw your design with lines   
 +
 +
[[File:File (2).jpg|left|thumb]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
 
> Make colors in RGB (RED to engrave, BLUE to cut)
 
> Make colors in RGB (RED to engrave, BLUE to cut)

Revision as of 17:56, 11 February 2019

The model of the Laser Engraving Machine located in Hackerspace.gr (Ampatiellou 11, 11144, Athens) is HQ-3020B. It is capable of cutting, engraving, and marking a number of different materials quickly and accurately when driven from CAD software such as CorelDraw and Inkscape.


How to use it:

Download:

> Inkscape [1]

> K40 Whisperer [2]


To create your file:

> Open Inkscape

File 1.jpeg





> Draw your design with lines

File (2).jpg






> Make colors in RGB (RED to engrave, BLUE to cut)


> Select correct Document Properties:

- UNITS must be all in MM

- RESIZE page to content


> Save as .svg file.


To cut your file:


> Connect computer and machine with USB cable


> Switch on the machine:

- Switch power on

- Switch light on


In K40 Whisperer:

( > Open K40 Whisperer )

> Initialize laser-cutter

> Open design file

> Adjust starting point and speed in K40 Whisperer


On the machine:

> Place your material inside (it must be no bigger than A4)

> Adjust power on machine


> First engrave (BLUE) and then (CUT)


> Switch off machine

> Clean up gently with vacuum cleaner


This text contains information copied or inspired from http://atxhackerspace.org .