Difference between revisions of "Laser Engraving Machine"
Thanos.Husk (Talk | contribs) |
(→How to use it:) |
||
| Line 64: | Line 64: | ||
| − | ''' | + | '''Download:''' |
> Inkscape [https://inkscape.org/release/inkscape-0.92.3/] | > Inkscape [https://inkscape.org/release/inkscape-0.92.3/] | ||
| Line 72: | Line 72: | ||
| − | ''' | + | '''To create your file:''' |
> Open Inkscape | > Open Inkscape | ||
| Line 121: | Line 121: | ||
| − | > Make colors in RGB ( | + | > Make colors in RGB (Blue to engrave, red to cut) |
[[File:File (6).jpg|left|thumb]] | [[File:File (6).jpg|left|thumb]] | ||
| Line 225: | Line 225: | ||
| − | ''' | + | '''To cut your file:''' |
| Line 525: | Line 525: | ||
[[File:Vacuum.jpg|left|thumb]] | [[File:Vacuum.jpg|left|thumb]] | ||
[[File:Cleanup-min.jpg|left|thumb]] | [[File:Cleanup-min.jpg|left|thumb]] | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
== Useful links == | == Useful links == | ||
Revision as of 23:38, 6 May 2021
The model of the Laser Engraving Machine located in Hackerspace.gr (Ampatiellou 11, 11144, Athens) is HQ-3020B. It is capable of cutting, engraving, and marking a number of different materials quickly and accurately when driven from CAD software such as CorelDraw and Inkscape.
Material Information
Materials that can and cannot be laser-cut [1]
| Material | Thickness (mm) | Operation | Power | Feed (mm/s) | Passes |
|---|---|---|---|---|---|
| Flexoid Oil Resistant Jointing sheet [2][3] | 0.5 | Cut | 17 | 10 | 1 |
| Flexoid Oil Resistant Jointing sheet [4][5] | 0.8 | Cut | 20 | 10 | 1 |
| TEMAFAST ECONOMY [6] | 1 | Cut | 40 | 10 | 5 |
| Plywood | 3 | Cut | 30 | 10 | 2 |
| White glossy vinyl | 0.24 | Cut | 7 | 20 | 1 |
| Black matte vinyl | 0.24 | Cut | 7 | 20 | 1 |
How to use it:
Download:
> Inkscape [7]
> K40 Whisperer [8]
To create your file:
> Open Inkscape
> Draw your design with lines
.jpg)
.jpg)
.jpg)
> Make colors in RGB (Blue to engrave, red to cut)
.jpg)
.jpg)
> Select correct Document Properties:
- UNITS must be all in MM
- RESIZE page to content
.jpg)
.jpg)
.jpg)
> Save as .svg file.
.jpg)
.jpg)
.jpg)
To cut your file:
> Connect computer and machine with USB cable
> Switch on the machine:
-min.jpg)
- Switch power on
- Switch light on
- Plug-in air - compressor
In K40 Whisperer:
( > Open K40 Whisperer )
.jpg)
> Initialize laser-cutter
.jpg)
> Open design file
.jpg)
> Adjust starting point and speed in K40 Whisperer
.jpg)
.jpg)
.jpg)
On the machine:
> Place your material inside (it must be no bigger than A4)
> Adjust power on machine
> Make test
> First engrave (BLUE) and then (CUT) by clicking "Vector Engrave" and "Vector Cut" in "K40 Whisperer".
-min.jpg)
Make sure temperature does not exceed 30 °C
> Switch off machine
> Clean up gently with vacuum cleaner
Useful links
> boxes.py [9]
> obrary [10]
Projects
> what is cosmos / τι είναι κόσμος
This text contains information copied or inspired from http://atxhackerspace.org .
