Difference between revisions of "Laser Engraving Machine"

From Hackerspace.gr
Jump to: navigation, search
Line 134: Line 134:
 
[[File:File (15).jpg|left|thumb]]
 
[[File:File (15).jpg|left|thumb]]
 
[[File:File (16).jpg|left|thumb]]
 
[[File:File (16).jpg|left|thumb]]
 +
  
  
Line 172: Line 173:
  
 
> Connect computer and machine with USB cable
 
> Connect computer and machine with USB cable
 +
[[File:Usb-min.jpg|left|thumb]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
−
[[File:File (16).jpg|left|thumb]]
 
  
 
> Switch on the machine:
 
> Switch on the machine:
 +
[[File:Switch (2)-min.jpg|left|thumb]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
 
- Switch power on
 
- Switch power on
  
 
- Switch light on
 
- Switch light on
 +
[[File:Switches-min.jpg|left|thumb]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
- Plug-in air - compressor
 +
[[File:Vacuuuum-min.jpg|left|thumb]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
−
- Connect on current ~
 
  
  
Line 187: Line 233:
  
 
( > Open K40 Whisperer  )
 
( > Open K40 Whisperer  )
 +
[[File:File K40 (2).jpg|left|thumb]]
  
−
> Initialize laser-cutter
 
  
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
> Initialize laser-cutter
 
[[File:File K40 (1).jpg|left|thumb]]
 
[[File:File K40 (1).jpg|left|thumb]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
 
> Open design file
 
> Open design file
 
[[File:File K40 (2).jpg|left|thumb]]
 
[[File:File K40 (2).jpg|left|thumb]]
 
[[File:File K40 (3).jpg|left|thumb]]
 
[[File:File K40 (3).jpg|left|thumb]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
 
> Adjust starting point and speed in K40 Whisperer
 
> Adjust starting point and speed in K40 Whisperer
Line 200: Line 291:
 
[[File:File K40 (5).jpg|left|thumb]]
 
[[File:File K40 (5).jpg|left|thumb]]
 
[[File:File K40 (6).jpg|left|thumb]]
 
[[File:File K40 (6).jpg|left|thumb]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
 
On the machine:
 
On the machine:
  
 
> Place your material inside (it must be no bigger than A4)
 
> Place your material inside (it must be no bigger than A4)
 +
[[File:Placematerial-min.jpg|left|thumb]]
 +
[[File:Open-min.jpg|left|thumb]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
 
> Adjust power on machine
 
> Adjust power on machine
 +
[[File:Poweradjustment-min.jpg|left|thumb]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
> Make test
 +
[[File:Test-min.jpg|left|thumb]]
 +
[[File:Test2-min.jpg|left|thumb]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
  
 
> First engrave (BLUE) and then (CUT)
 
> First engrave (BLUE) and then (CUT)
 +
by clicking "Vector Engrave" and "Vector Cut" in "K40 Whisperer".
 +
[[File:File K40 (6).jpg|left|thumb]]
 +
[[File:Cut-min.jpg|left|thumb]]
 +
[[File:Cut (2)-min.jpg|left|thumb]]
 +
[[File:Result-min.jpg|left|thumb]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
Make sure temperature does not exceed 30 °C
 +
[[File:Temperature-min.jpg|left|thumb]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
  
Line 214: Line 467:
  
 
> Clean up gently with vacuum cleaner
 
> Clean up gently with vacuum cleaner
 +
[[File:Vacuum.jpg|left|thumb]]
 +
[[File:Cleanup-min.jpg|left|thumb]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
  
  
 
This text contains information copied or inspired from http://atxhackerspace.org .
 
This text contains information copied or inspired from http://atxhackerspace.org .

Revision as of 15:30, 12 February 2019

The model of the Laser Engraving Machine located in Hackerspace.gr (Ampatiellou 11, 11144, Athens) is HQ-3020B. It is capable of cutting, engraving, and marking a number of different materials quickly and accurately when driven from CAD software such as CorelDraw and Inkscape.


How to use it:

Download:

> Inkscape [1]

> K40 Whisperer [2]


To create your file:

> Open Inkscape

File 1.jpeg






> Draw your design with lines

File (2).jpg
File (3).jpg
File (4).jpg















> Make colors in RGB (RED to engrave, BLUE to cut)

File (6).jpg
File (7).jpg











> Select correct Document Properties:

- UNITS must be all in MM

- RESIZE page to content

File (9).jpg
File (10).jpg
File (12).jpg
















> Save as .svg file.

File (13).jpg
File (15).jpg
File (16).jpg


















To cut your file:


> Connect computer and machine with USB cable

Usb-min.jpg







> Switch on the machine:

Switch (2)-min.jpg







- Switch power on

- Switch light on

Switches-min.jpg







- Plug-in air - compressor

Vacuuuum-min.jpg







In K40 Whisperer:

( > Open K40 Whisperer )

File K40 (2).jpg







> Initialize laser-cutter

File K40 (1).jpg







> Open design file

File K40 (2).jpg
File K40 (3).jpg













> Adjust starting point and speed in K40 Whisperer

File K40 (4).jpg
File K40 (5).jpg
File K40 (6).jpg



















On the machine:

> Place your material inside (it must be no bigger than A4)

Placematerial-min.jpg
Open-min.jpg













> Adjust power on machine

Poweradjustment-min.jpg







> Make test

Test-min.jpg
Test2-min.jpg













> First engrave (BLUE) and then (CUT) by clicking "Vector Engrave" and "Vector Cut" in "K40 Whisperer".

File K40 (6).jpg
Cut-min.jpg
Cut (2)-min.jpg
Result-min.jpg
























Make sure temperature does not exceed 30 °C

Temperature-min.jpg







> Switch off machine

> Clean up gently with vacuum cleaner

Vacuum.jpg
Cleanup-min.jpg














This text contains information copied or inspired from http://atxhackerspace.org .

Retrieved from "https://www.hackerspace.gr/wiki/index.php?title=Laser_Engraving_Machine&oldid=80676"