Difference between revisions of "Laser Engraving Machine"
(Add material table) |
|||
| Line 3: | Line 3: | ||
| − | + | == Material Information == | |
| − | + | Materials that can and cannot be laser-cut [https://www.pololu.com/docs/0J24/3] | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
{| class="wikitable" | {| class="wikitable" | ||
Revision as of 20:05, 12 June 2020
The model of the Laser Engraving Machine located in Hackerspace.gr (Ampatiellou 11, 11144, Athens) is HQ-3020B. It is capable of cutting, engraving, and marking a number of different materials quickly and accurately when driven from CAD software such as CorelDraw and Inkscape.
Material Information
Materials that can and cannot be laser-cut [1]
| Material | Thickness (mm) | Operation | Power | Feed (mm/s) |
|---|---|---|---|---|
| Flexoid Oil Resistant Jointing sheet | 0.5 | Cut | 17 | 10 |
| Flexoid Oil Resistant Jointing sheet | 0.7 | Cut | 20 | 10 |
How to use it:
Download:
> Inkscape [2]
> K40 Whisperer [3]
To create your file:
> Open Inkscape
> Draw your design with lines
> Make colors in RGB (RED to engrave, BLUE to cut)
> Select correct Document Properties:
- UNITS must be all in MM
- RESIZE page to content
> Save as .svg file.
To cut your file:
> Connect computer and machine with USB cable
> Switch on the machine:
- Switch power on
- Switch light on
- Plug-in air - compressor
In K40 Whisperer:
( > Open K40 Whisperer )
> Initialize laser-cutter
> Open design file
> Adjust starting point and speed in K40 Whisperer
On the machine:
> Place your material inside (it must be no bigger than A4)
> Adjust power on machine
> Make test
> First engrave (BLUE) and then (CUT) by clicking "Vector Engrave" and "Vector Cut" in "K40 Whisperer".
Make sure temperature does not exceed 30 °C
> Switch off machine
> Clean up gently with vacuum cleaner
Useful links
Projects
> what is cosmos / τι είναι κόσμος
This text contains information copied or inspired from http://atxhackerspace.org .