3D Printing

From Hackerspace.gr
Revision as of 03:42, 6 December 2017 by Drid (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

HSGR 3D printers are controlled via octopi.

  1. TAZ 4: http://octopi.hsgr.awmn/
  2. AO100: http://octopi.hsgr.awmn/A100/

Username: hsgr Password: hsgr3d

Some ground rules

  1. Important: Make sure that the printer bed is free from objects before printing.
  2. Keep uploaded files tidy by using folders.
  3. Do not stop prints of other users.
  4. Replace printer bed tape when it is damaged.


  1. Generate GCode using Slic3r or Cura and the appropriate printer profile.
  2. Connect to octopi
  3. Upload file
  4. Set temperatures if not set by GCode
  5. Print !!!