Difference between revisions of "3D Printing"

From Hackerspace.gr
Jump to: navigation, search
Line 22: Line 22:
 
# Upload file
 
# Upload file
 
# Turn on the printer
 
# Turn on the printer
 +
# Apply the appropriate adhesive for the material you are printing with to the bed
 
# Set temperatures if not set by GCode
 
# Set temperatures if not set by GCode
 
# Print !!!
 
# Print !!!

Revision as of 05:13, 6 December 2017

HSGR 3D printers are controlled via octopi.

  1. TAZ 4: http://octopi.hsgr.awmn/
  2. AO100: http://octopi.hsgr.awmn/A100/
  3. Delta: WiP
  4. CnC: WiP

Username: hsgr Password: hsgr3d

Some ground rules

  1. Important: Make sure that the printer bed is free from objects before printing.
  2. Keep uploaded files tidy by using folders.
  3. Do not stop prints of other users.
  4. Replace printer bed tape when it is damaged.

Printing

  1. Generate GCode using Slic3r or Cura and the appropriate printer profile.
  2. Connect to octopi
  3. Upload file
  4. Turn on the printer
  5. Apply the appropriate adhesive for the material you are printing with to the bed
  6. Set temperatures if not set by GCode
  7. Print !!!
  8. Turn off the printer