Difference between revisions of "3D Printing"

From Hackerspace.gr
Jump to: navigation, search
(Created page with "HSGR 3D printers are controlled via octopi. # TAZ 4: http://octopi.hsgr.awmn/ # AO100: http://octopi.hsgr.awmn/A100/ Username: hsgr Password: hsgr3d == Some ground rules ==...")
 
Line 3: Line 3:
 
# TAZ 4: http://octopi.hsgr.awmn/
 
# TAZ 4: http://octopi.hsgr.awmn/
 
# AO100: http://octopi.hsgr.awmn/A100/
 
# AO100: http://octopi.hsgr.awmn/A100/
 +
# Delta: WiP
 +
# CnC: WiP
  
 
Username: hsgr
 
Username: hsgr

Revision as of 02:43, 6 December 2017

HSGR 3D printers are controlled via octopi.

  1. TAZ 4: http://octopi.hsgr.awmn/
  2. AO100: http://octopi.hsgr.awmn/A100/
  3. Delta: WiP
  4. CnC: WiP

Username: hsgr Password: hsgr3d

Some ground rules

  1. Important: Make sure that the printer bed is free from objects before printing.
  2. Keep uploaded files tidy by using folders.
  3. Do not stop prints of other users.
  4. Replace printer bed tape when it is damaged.

Printing

  1. Generate GCode using Slic3r or Cura and the appropriate printer profile.
  2. Connect to octopi
  3. Upload file
  4. Set temperatures if not set by GCode
  5. Print !!!