https://www.hackerspace.gr/wiki/api.php?action=feedcontributions&user=Taosubmarines&feedformat=atom
Hackerspace.gr - User contributions [en]
2024-03-29T01:11:38Z
User contributions
MediaWiki 1.23.13
//www.hackerspace.gr/wiki/Category:FoodHacking
Category:FoodHacking
2015-01-26T07:28:53Z
<p>Taosubmarines: drinkhacking</p>
<hr />
<div>'''Working Pads''': <br />
[https://pad.hackerspace.gr/p/drinkhacking Making Drinks, Juices, Alcohol, Brewing] <br />
[https://pad.hackerspace.gr/p/foodhacking current notes] | [https://pad.hackerspace.gr/p/foodhacking_documentation past notes] | [https://pad.hackerspace.gr/p/foodhacking_brainstorming unfiltered brainstorming]<br />
----<br />
<br />
[[Category:Projects]]</div>
Taosubmarines
//www.hackerspace.gr/wiki/OpenerPCR
OpenerPCR
2014-09-13T06:37:27Z
<p>Taosubmarines: Edit</p>
<hr />
<div> <br />
[[http://openpcr.org/ OpenPCR]] is a low-cost yet accurate thermocycler you build yourself, capable of reliably controlling PCR reactions for DNA detection, sequencing, and limitless other applications<br />
<br />
− <br />
[[http://www.diybiogroningen.org/mediawiki-1.22.0/index.php?title=OpenerPCR_Electronics,_GR Contibution to parent page]]<br />
<br />
− <br />
Here I put where in Greece the electronics can be sourced<br />
<br />
'''Components'''<br />
<br />
'''Active/passive components'''<br />
<br />
Brand official Serial Description SMD What we really bought<br />
<br />
2 Yageo SQP10AJB-4R7 Resistor, 4.7 Ohm, 10 W No Conrad<br />
<br />
''Sparkfun Resistor Kit, and other 1/4W resistors? Where can they NOT be used''<br />
<br />
1 Panasonic ERG-2SJ160 Resistor, 16 Ohm No 3 resistors circuit: (10 + 22) + 10<br />
<br />
2 Yageo MFP-25BRD52-2K2 Resistor, 2.2k Ohm, 0.1% No Resistor, 2.2k Ohm, 1%<br />
<br />
1 Tyco 282834-6 Terminal block, 6 connector No <br />
<br />
2 Panasonic ERJ-3GEYJ332V Resistor, 3.3k Ohm Yes 3 resistors circuit: (22K + 22K) + 22<br />
<br />
4 Panasonic ERJ-3GEYJ102V Resistor, 1k Ohm Yes As is<br />
<br />
1 Panasonic ERG-1SJ510 Resistor, 51 Ohm, 1 W No Okaphone: Resistor, 56 Ohm, 1 W<br />
<br />
1 Fairchild RFD3055LE Transistor, MOSFET N-Ch No <br />
<br />
1 Microchip MCP3551-E/SN ADC, 22 bit No Okaphone<br />
<br />
1 Panasonic ECA-1CM332 Capacitor, 3300 uF No Conrad<br />
<br />
1 Panasonic ECA-1CM102 Capacitor, 1000 uF No Conrad<br />
<br />
1 ST VNH3SP30 H-Bridge IC Yes Okaphone<br />
<br />
1 Custom Peltier, Qmax = 84 W, dT = 78 K, Imax = 7.8 A Can one less powerful be used [http://grobotronics.com/thermoelectric-cooler-40x40mm.html] <br />
<br />
1 US Sensor USP11553 rev none Thermistor / PTC, ''Reprap'', [http://grobotronics.com/thermistor-10k.html]<br />
<br />
1 Custom Kapton Heater, 25 W, 11.3 V, ''Reprap'', 12V 40W [http://grobotronics.com/reprap-12v-40w-ceramic-cartridge-heater.html]<br />
<br />
Where does the 4 channel Relay Module fit in? [http://grobotronics.com/relay-module-4-channel.html]<br />
<br />
'''Autonomous parts'''<br />
<br />
Things to connect components with/on/to<br />
<br />
Number Part What we really bought<br />
<br />
1 Arduino Uno Replace with Arduino Mega clone, "from RepRap project"<br />
<br />
1 MicroATX power supply, 200 W, 14 A on 12 V rail, fan temperature control disabled, 24 pin ATX connector only<br />
<br />
1 Ribbon cable, 16 pin, female - female, 24" <br />
<br />
1 LCD, HD44780 compatible, 20 chars, 4 rows, blue backlight [http://grobotronics.com/lcd-module-16x2-5v-green-black-en.html]<br />
<br />
1 PCB Etched, '''WANT'''<br />
<br />
1 USB Cable, A to B, 6 feet <br />
<br />
1 PSU Power Cord, USA plug, 6 feet</div>
Taosubmarines
//www.hackerspace.gr/wiki/OpenerPCR
OpenerPCR
2014-09-13T06:35:31Z
<p>Taosubmarines: Edit</p>
<hr />
<div> <br />
[[http://openpcr.org/ OpenPCR]] is a low-cost yet accurate thermocycler you build yourself, capable of reliably controlling PCR reactions for DNA detection, sequencing, and limitless other applications<br />
<br />
− <br />
[[http://www.diybiogroningen.org/mediawiki-1.22.0/index.php?title=OpenerPCR_Electronics,_GR Contibution to parent page]]<br />
<br />
− <br />
Here I put where in Greece the electronics can be sourced<br />
<br />
Components<br />
Active/passive components<br />
Brand official Serial Description SMD What we really bought<br />
<br />
2 Yageo SQP10AJB-4R7 Resistor, 4.7 Ohm, 10 W No Conrad<br />
<br />
'''Sparkfun Resistor Kit, and other 1/4W resistors? Where can they NOT be used'''<br />
<br />
1 Panasonic ERG-2SJ160 Resistor, 16 Ohm No 3 resistors circuit: (10 + 22) + 10<br />
<br />
2 Yageo MFP-25BRD52-2K2 Resistor, 2.2k Ohm, 0.1% No Resistor, 2.2k Ohm, 1%<br />
<br />
1 Tyco 282834-6 Terminal block, 6 connector No <br />
<br />
2 Panasonic ERJ-3GEYJ332V Resistor, 3.3k Ohm Yes 3 resistors circuit: (22K + 22K) + 22<br />
<br />
4 Panasonic ERJ-3GEYJ102V Resistor, 1k Ohm Yes As is<br />
<br />
1 Panasonic ERG-1SJ510 Resistor, 51 Ohm, 1 W No Okaphone: Resistor, 56 Ohm, 1 W<br />
<br />
1 Fairchild RFD3055LE Transistor, MOSFET N-Ch No <br />
<br />
1 Microchip MCP3551-E/SN ADC, 22 bit No Okaphone<br />
<br />
1 Panasonic ECA-1CM332 Capacitor, 3300 uF No Conrad<br />
<br />
1 Panasonic ECA-1CM102 Capacitor, 1000 uF No Conrad<br />
<br />
1 ST VNH3SP30 H-Bridge IC Yes Okaphone<br />
<br />
1 Custom Peltier, Qmax = 84 W, dT = 78 K, Imax = 7.8 A Can one less powerful be used [http://grobotronics.com/thermoelectric-cooler-40x40mm.html] <br />
<br />
1 US Sensor USP11553 rev none Thermistor / PTC, ''Reprap'', [http://grobotronics.com/thermistor-10k.html]<br />
<br />
1 Custom Kapton Heater, 25 W, 11.3 V, ''Reprap'', 12V 40W [http://grobotronics.com/reprap-12v-40w-ceramic-cartridge-heater.html]<br />
<br />
Where does the 4 channel Relay Module fit in? [http://grobotronics.com/relay-module-4-channel.html]<br />
<br />
'''Autonomous parts'''<br />
<br />
Things to connect components with/on/to<br />
<br />
Number Part What we really bought<br />
<br />
1 Arduino Uno Replace with Arduino Mega clone, "from RepRap project"<br />
<br />
1 MicroATX power supply, 200 W, 14 A on 12 V rail, fan temperature control disabled, 24 pin ATX connector only<br />
<br />
1 Ribbon cable, 16 pin, female - female, 24" <br />
<br />
1 LCD, HD44780 compatible, 20 chars, 4 rows, blue backlight [http://grobotronics.com/lcd-module-16x2-5v-green-black-en.html]<br />
<br />
1 PCB Etched, '''WANT'''<br />
<br />
1 USB Cable, A to B, 6 feet <br />
<br />
1 PSU Power Cord, USA plug, 6 feet</div>
Taosubmarines
//www.hackerspace.gr/wiki/OpenerPCR
OpenerPCR
2014-09-13T06:35:02Z
<p>Taosubmarines: Edit</p>
<hr />
<div> <br />
[[http://openpcr.org/ OpenPCR]] is a low-cost yet accurate thermocycler you build yourself, capable of reliably controlling PCR reactions for DNA detection, sequencing, and limitless other applications<br />
<br />
− <br />
<br />
− <br />
[[http://www.diybiogroningen.org/mediawiki-1.22.0/index.php?title=OpenerPCR_Electronics,_GR Contibution to parent page]]<br />
<br />
− <br />
Here I put where in Greece the electronics can be sourced<br />
<br />
Components<br />
Active/passive components<br />
Brand official Serial Description SMD What we really bought<br />
<br />
2 Yageo SQP10AJB-4R7 Resistor, 4.7 Ohm, 10 W No Conrad<br />
<br />
'''Sparkfun Resistor Kit, and other 1/4W resistors? Where can they NOT be used'''<br />
<br />
1 Panasonic ERG-2SJ160 Resistor, 16 Ohm No 3 resistors circuit: (10 + 22) + 10<br />
<br />
2 Yageo MFP-25BRD52-2K2 Resistor, 2.2k Ohm, 0.1% No Resistor, 2.2k Ohm, 1%<br />
<br />
1 Tyco 282834-6 Terminal block, 6 connector No <br />
<br />
2 Panasonic ERJ-3GEYJ332V Resistor, 3.3k Ohm Yes 3 resistors circuit: (22K + 22K) + 22<br />
<br />
4 Panasonic ERJ-3GEYJ102V Resistor, 1k Ohm Yes As is<br />
<br />
1 Panasonic ERG-1SJ510 Resistor, 51 Ohm, 1 W No Okaphone: Resistor, 56 Ohm, 1 W<br />
<br />
1 Fairchild RFD3055LE Transistor, MOSFET N-Ch No <br />
<br />
1 Microchip MCP3551-E/SN ADC, 22 bit No Okaphone<br />
<br />
1 Panasonic ECA-1CM332 Capacitor, 3300 uF No Conrad<br />
<br />
1 Panasonic ECA-1CM102 Capacitor, 1000 uF No Conrad<br />
<br />
1 ST VNH3SP30 H-Bridge IC Yes Okaphone<br />
<br />
1 Custom Peltier, Qmax = 84 W, dT = 78 K, Imax = 7.8 A Can one less powerful be used [http://grobotronics.com/thermoelectric-cooler-40x40mm.html] <br />
<br />
1 US Sensor USP11553 rev none Thermistor / PTC, ''Reprap'', [http://grobotronics.com/thermistor-10k.html]<br />
<br />
1 Custom Kapton Heater, 25 W, 11.3 V, ''Reprap'', 12V 40W [http://grobotronics.com/reprap-12v-40w-ceramic-cartridge-heater.html]<br />
<br />
Where does the 4 channel Relay Module fit in? [http://grobotronics.com/relay-module-4-channel.html]<br />
<br />
'''Autonomous parts'''<br />
<br />
Things to connect components with/on/to<br />
<br />
Number Part What we really bought<br />
<br />
1 Arduino Uno Replace with Arduino Mega clone, "from RepRap project"<br />
<br />
1 MicroATX power supply, 200 W, 14 A on 12 V rail, fan temperature control disabled, 24 pin ATX connector only<br />
<br />
1 Ribbon cable, 16 pin, female - female, 24" <br />
<br />
1 LCD, HD44780 compatible, 20 chars, 4 rows, blue backlight [http://grobotronics.com/lcd-module-16x2-5v-green-black-en.html]<br />
<br />
1 PCB Etched, '''WANT'''<br />
<br />
1 USB Cable, A to B, 6 feet <br />
<br />
1 PSU Power Cord, USA plug, 6 feet</div>
Taosubmarines
//www.hackerspace.gr/wiki/OpenerPCR
OpenerPCR
2014-09-12T16:17:56Z
<p>Taosubmarines: Electronics BOM, Opener PCR</p>
<hr />
<div>Components<br />
Active/passive components<br />
Brand official Serial Description SMD What we really bought<br />
<br />
2 Yageo SQP10AJB-4R7 Resistor, 4.7 Ohm, 10 W No Conrad<br />
<br />
'''Sparkfun Resistor Kit, and other 1/4W resistors? Where can they NOT be used'''<br />
<br />
1 Panasonic ERG-2SJ160 Resistor, 16 Ohm No 3 resistors circuit: (10 + 22) + 10<br />
<br />
2 Yageo MFP-25BRD52-2K2 Resistor, 2.2k Ohm, 0.1% No Resistor, 2.2k Ohm, 1%<br />
<br />
1 Tyco 282834-6 Terminal block, 6 connector No <br />
<br />
2 Panasonic ERJ-3GEYJ332V Resistor, 3.3k Ohm Yes 3 resistors circuit: (22K + 22K) + 22<br />
<br />
4 Panasonic ERJ-3GEYJ102V Resistor, 1k Ohm Yes As is<br />
<br />
1 Panasonic ERG-1SJ510 Resistor, 51 Ohm, 1 W No Okaphone: Resistor, 56 Ohm, 1 W<br />
<br />
1 Fairchild RFD3055LE Transistor, MOSFET N-Ch No <br />
<br />
1 Microchip MCP3551-E/SN ADC, 22 bit No Okaphone<br />
<br />
1 Panasonic ECA-1CM332 Capacitor, 3300 uF No Conrad<br />
<br />
1 Panasonic ECA-1CM102 Capacitor, 1000 uF No Conrad<br />
<br />
1 ST VNH3SP30 H-Bridge IC Yes Okaphone<br />
<br />
1 Custom Peltier, Qmax = 84 W, dT = 78 K, Imax = 7.8 A Can one less powerful be used [http://grobotronics.com/thermoelectric-cooler-40x40mm.html] <br />
<br />
1 US Sensor USP11553 rev none Thermistor / PTC, ''Reprap'', [http://grobotronics.com/thermistor-10k.html]<br />
<br />
1 Custom Kapton Heater, 25 W, 11.3 V, ''Reprap'', 12V 40W [http://grobotronics.com/reprap-12v-40w-ceramic-cartridge-heater.html]<br />
<br />
Where does the 4 channel Relay Module fit in? [http://grobotronics.com/relay-module-4-channel.html]<br />
<br />
'''Autonomous parts'''<br />
<br />
Things to connect components with/on/to<br />
<br />
Number Part What we really bought<br />
<br />
1 Arduino Uno Replace with Arduino Mega clone, "from RepRap project"<br />
<br />
1 MicroATX power supply, 200 W, 14 A on 12 V rail, fan temperature control disabled, 24 pin ATX connector only<br />
<br />
1 Ribbon cable, 16 pin, female - female, 24" <br />
<br />
1 LCD, HD44780 compatible, 20 chars, 4 rows, blue backlight [http://grobotronics.com/lcd-module-16x2-5v-green-black-en.html]<br />
<br />
1 PCB Etched, '''WANT'''<br />
<br />
1 USB Cable, A to B, 6 feet <br />
<br />
1 PSU Power Cord, USA plug, 6 feet</div>
Taosubmarines
//www.hackerspace.gr/wiki/Category:Projects
Category:Projects
2014-09-12T15:46:27Z
<p>Taosubmarines: exist</p>
<hr />
<div>Σ' αυτή την σελίδα καταγράφονται όλα τα Projects του Hackerspace. Τα περισσότερα απ' αυτά θα τα βρείτε και στο [http://github.com/hsgr github του hackerspace].<br />
<br />
[[OpenerPCR]]</div>
Taosubmarines
//www.hackerspace.gr/wiki/OpenerPCR
OpenerPCR
2014-09-12T15:28:26Z
<p>Taosubmarines: Genesis</p>
<hr />
<div>[[http://openpcr.org/ OpenPCR]] is a low-cost yet accurate thermocycler you build yourself, capable of reliably controlling PCR reactions for DNA detection, sequencing, and limitless other applications<br />
<br />
[[http://www.diybiogroningen.org/mediawiki-1.22.0/index.php?title=OpenerPCR_Electronics,_GR Contibution to parent page]]<br />
Here I put where in Greece the electronics can be sourced<br />
<br />
Components<br />
Active/passive components<br />
Brand official Serial Description SMD What we really bought<br />
<br />
2 Yageo SQP10AJB-4R7 Resistor, 4.7 Ohm, 10 W No Conrad<br />
<br />
'''Sparkfun Resistor Kit, and other 1/4W resistors? Where can they NOT be used'''<br />
<br />
1 Panasonic ERG-2SJ160 Resistor, 16 Ohm No 3 resistors circuit: (10 + 22) + 10<br />
<br />
2 Yageo MFP-25BRD52-2K2 Resistor, 2.2k Ohm, 0.1% No Resistor, 2.2k Ohm, 1%<br />
<br />
1 Tyco 282834-6 Terminal block, 6 connector No <br />
<br />
2 Panasonic ERJ-3GEYJ332V Resistor, 3.3k Ohm Yes 3 resistors circuit: (22K + 22K) + 22<br />
<br />
4 Panasonic ERJ-3GEYJ102V Resistor, 1k Ohm Yes As is<br />
<br />
1 Panasonic ERG-1SJ510 Resistor, 51 Ohm, 1 W No Okaphone: Resistor, 56 Ohm, 1 W<br />
<br />
1 Fairchild RFD3055LE Transistor, MOSFET N-Ch No <br />
<br />
1 Microchip MCP3551-E/SN ADC, 22 bit No Okaphone<br />
<br />
1 Panasonic ECA-1CM332 Capacitor, 3300 uF No Conrad<br />
<br />
1 Panasonic ECA-1CM102 Capacitor, 1000 uF No Conrad<br />
<br />
1 ST VNH3SP30 H-Bridge IC Yes Okaphone<br />
<br />
1 Custom Peltier, Qmax = 84 W, dT = 78 K, Imax = 7.8 A Can one less powerful be used [http://grobotronics.com/thermoelectric-cooler-40x40mm.html] <br />
<br />
1 US Sensor USP11553 rev none Thermistor / PTC [http://grobotronics.com/thermistor-10k.html]<br />
<br />
1 Custom Kapton Heater, 25 W, 11.3 V Reprap, 12V 40W [http://grobotronics.com/reprap-12v-40w-ceramic-cartridge-heater.html]<br />
<br />
'''Autonomous parts'''<br />
<br />
Things to connect components with/on/to<br />
<br />
Number Part What we really bought<br />
<br />
1 Arduino Uno Replace with Arduino Mega clone, from RepRap project<br />
<br />
1 MicroATX power supply, 200 W, 14 A on 12 V rail, fan temperature control disabled, 24 pin ATX connector only<br />
<br />
1 Ribbon cable, 16 pin, female - female, 24" <br />
<br />
1 LCD, HD44780 compatible, 20 chars, 4 rows, blue backlight [http://grobotronics.com/lcd-module-16x2-5v-green-black-en.html]<br />
<br />
1 PCB Etched, '''WANT'''<br />
<br />
1 USB Cable, A to B, 6 feet <br />
<br />
1 PSU Power Cord, USA plug, 6 feet</div>
Taosubmarines